Especificaciones por familia.Family specifications.
Rangos típicos para material recuperado verificado, por familia de polímero. Cada lote individual entrega COA con valores reales. Rangos basados en ASTM e ISO de referencia.Typical ranges for verified recovered material, per polymer family. Every individual lot ships with a COA showing actual values. Ranges based on ASTM and ISO references.
PETPolietileno tereftalato · ISO 1043 · ASTM D4603
Resina termoplástica semi-cristalina de uso masivo en envase de bebidas y fibra textil. Recuperado mecánicamente de botella post-consumo y scrap industrial.Semi-crystalline thermoplastic resin used widely for beverage bottles and textile fiber. Mechanically recovered from post-consumer bottle and industrial scrap.
IV / Viscosidad
0.65 - 0.85 dL/g
ASTM D4603
Densidad
1.33 - 1.41 g/cm³
ISO 1183
Tg / Tm
75 °C / 250-260 °C
DSC
HumedadMoisture
< 0.04%
tras secadoafter drying
Aplicaciones típicasTypical applications
Botella bottle-to-bottle (food-contact con grado FDA / EFSA)Bottle-to-bottle (food-contact with FDA / EFSA grade)
Fibra para textil no-tejido y cinta de poliésterNon-woven textile fiber and PET strapping
Compuesto reforzado con fibra de vidrio (PET-GF)Glass-fiber reinforced compound (PET-GF)
HDPEPolietileno alta densidad · ISO 1872 · ASTM D1238
Termoplástico semi-cristalino de alta resistencia química. Recuperado de botella, contenedor industrial y film soplado.Semi-crystalline thermoplastic with high chemical resistance. Recovered from bottle, industrial container and blown film.
Tubo y conexión (PE-100)Pipe and fittings (PE-100)
Bidón / IBC linerDrum / IBC liner
Film extrudido para empaque secundarioExtruded film for secondary packaging
LDPEPolietileno baja densidad · ISO 1872
Polietileno ramificado, flexible, de bajo módulo. Recuperado de film stretch, bolsa transparente y revestimiento.Branched, flexible, low-modulus polyethylene. Recovered from stretch film, clear bag and coating.
MFI
0.5 - 22 g/10min
190 °C / 2.16 kg
Densidad
0.91 - 0.93 g/cm³
ISO 1183
ElongaciónElongation
300 - 800%
ISO 527
Tm
105 - 115 °C
DSC
Aplicaciones típicasTypical applications
Film stretch / shrink secundarioStretch / shrink film (secondary)
Bolsa industrial y de basuraIndustrial and trash bag
Coextrusión con HDPE para film de tres capasCoextrusion with HDPE for three-layer film
PPPolipropileno · ISO 1873 · ASTM D4101
Termoplástico semi-cristalino, balance peso/rigidez. Recuperado de envase rígido, autopartes y film orientado.Semi-crystalline thermoplastic with weight/stiffness balance. Recovered from rigid packaging, auto parts and oriented film.
Autopartes interiores (parachoques, defensas)Interior auto parts (bumpers, fascias)
Tapa y envase de detergenteCap and detergent container
Compuesto con talco (PP-T) o vidrio (PP-GF)Compound with talc (PP-T) or glass (PP-GF)
ABSAcrilonitrilo Butadieno Estireno · ISO 2580
Terpolímero amorfo de alta tenacidad. Recuperado de electrodoméstico, automotriz interior y juguete.Amorphous tough terpolymer. Recovered from appliance, automotive interior and toy.
MFI
8 - 35 g/10min
220 °C / 10 kg
Densidad
1.04 - 1.06 g/cm³
ISO 1183
Impacto IzodIzod impact
15 - 35 kJ/m²
ISO 180 · 23 °C
HDT
85 - 100 °C
ISO 75 · 1.8 MPa
Aplicaciones típicasTypical applications
Carcasa de electrodoméstico (refrigerador interior, lavadora)Appliance housing (fridge interior, washer)
Tubería sanitaria e impresión 3D (FDM)Sanitary pipe and 3D printing (FDM)
PCPolicarbonato · ISO 7391 · ASTM D3935
Termoplástico amorfo de ingeniería con alta resistencia al impacto y transparencia. Recuperado de garrafón, panel iluminado y carcasa óptica.Amorphous engineering thermoplastic with high impact resistance and transparency. Recovered from water bottle, lit panel and optical housing.
MFI
3 - 22 g/10min
300 °C / 1.2 kg
Densidad
1.20 - 1.22 g/cm³
ISO 1183
Impacto IzodIzod impact
600 - 900 J/m
ISO 180 · 23 °C
HDT
125 - 140 °C
ISO 75 · 1.8 MPa
Aplicaciones típicasTypical applications
Lente, mica y panel transparenteLens, sheet and transparent panel
Termoplástico amorfo, formulado rígido o flexible. Recuperado de tubería, perfil de ventana y cable. Por contenido de cloro requiere manejo separado: nunca mezclar con PE / PP en mismo lote de molienda.Amorphous thermoplastic, rigid or flexible formulation. Recovered from pipe, window profile and cable. Chlorine content requires separate handling: never mix with PE / PP in the same grinding batch.